Products
1200W digital shortwave radio
Key words:
Key words:
Emergency communication dispatching
Shortwave radio
Ultrashort wave radio
Short wave remote control
Classification:
- Product Features
- Technical parameters
-
- 设备名称: 1200W digital shortwave radio
The RM1200 is designed for ground-to-ground, ground-to-air and ground-to-sea long distance radio communications. It is a 19-inch rack-mounted stand-alone 1200W communications system that integrates micom radios, adaptive AC power supplies, multiple accessory interfaces, and a reliable heat sink. The micomRM500R meets the world's stringent standards for radio equipment communication system reliability, including MIL-STD-810, ALE per MIL-STD-188-141B and FED-STD-1045. micomRM500R is the ideal solution for long range command and control radio communications.
Product Description
The RM1200 is designed for ground-to-ground, ground-to-air and ground-to-sea long distance radio communications. It is a 19-inch rack-mounted stand-alone 1200W communications system that integrates micom radios, adaptive AC power supplies, multiple accessory interfaces, and a reliable heat sink. The micomRM500R meets the world's stringent standards for radio equipment communication system reliability, including MIL-STD-810, ALE per MIL-STD-188-141B and FED-STD-1045. micomRM500R is the ideal solution for long range command and control radio communications.
Product Features
Suitable circuit design provides high power output and long reliable operating performance for voice, CW and data (RTTY, ARQ, PACKET) services;
Amplifier circuits are designed for the inherently fast switching of ARQ operating modes, and the powerful signaling of the 1200W power amplifier enhances the reliability of the ARQ system;
100% all-solid-state, modular design - semiconductor power transistors used in 300 interchangeable and swappable modules consume less energy than conventional tube amplifiers and are simpler and more efficient to maintain;
Antenna mismatch protection protects the power amplifier from damage in the event of extreme antenna mismatch;
In fault weakened operation mode, the bi-directional power supply, parallel amplifier modules reduce power consumption and ensure uninterrupted communication under extreme fault conditions;
The built-in protection circuitry makes the amplifiers resistant to damage even in harsh operating environments;
Full compatibility with all Micom radios adds flexibility to system design and allows for synergy with established systems;
Wide bandwidth design provides fully automatic frequency tuning and setting adjustment;
Ammeters and voltmeters make it easier to monitor operating conditions;
The remote control panel provides faster control of the work;
The 16-bit microprocessor on the main control board centralizes all sensor information, amplifier band selection, automatic frequency tuning, maintenance and protection functions;
The built-in testing equipment gives the amplifier perfect reliability. -
Product Parameters
Main parameters
power output (of an electrical device etc)
1200 Watt PEP
1000 watts average
(±0.5 dB) Access 1.5:1 VSWR
4:1 VSWR - 50% power min.
frequency range
1.6–30 MHz
power input (of an electrical device etc)
20 Watts rated (0 dBm optional)
harmonic emission (physics)
-60 dBc
Frequency switching
Adjustment process (channel changeover max. 100ms)
Input Impedance
10 euros
T/R switching
Maximum 10ms
R/T switching
Maximum 10ms
Rx Bypass Mode
Rx/Tx toggle, receive enable
matrix
Operating Temperature Range
-10°C to +60°C
humidity level
95% @ 50℃
Input RF
N-Connector
Output RF
N-Connector
Control/Status
D-type 25-pin connector (includes PTT, BIT, VSWR, incident power, frequency tuning mode, on/off)
characterization
fixing method
19" Cabinet Fixing
AC Supply Voltage
90-264VAC, 47-63% (single phase)
redundancies
Two power module power supplies
Two 600W power amplifiers
125Wmicom output
(sth. or sb) else
Automatic bypass backup
Manual bypass selection
Automatic power level reduction
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online consultation
Zhejiang Kaichi Electronic Technology Co., Ltd.
Through continuous accumulation, continuous innovation, and gradually improve their own product chain, the company developed emergency communications software systems have entered the government and military customer market, and access to customer recognition and support.
Company address: Room 301, Block B, Zhejiang Digital Intelligence Engine Innovation Park, 131 Xiba Road, Yuhang District, Hangzhou City
Marketing Department:0571-88932986
Website:www.zjkaichi.cn www.zjkaichi.net
Mailbox:hzkdscb@163.com
Zip Code: 311122
©2023 Zhejiang Kaichi Electronic Technology Co., Ltd. All Rights Reserved |Powered by 300.cn
SAF Coolest v1.3 设置面板 DWRSX-ZTNQ-RFSAE-ADV
无数据提示
Sorry, the current column information is being updated.!
You can view other columns or returnHome Page